Installing A Sodimm - Cisco XR 12000 Series Installation Manual

Line Card Memory
Figure 52
As the SODIMM is released, it positions itself at a 45-degree angle. Gently pull the SODIMM module
Step 6
out of the socket. Continue to keep the module at a 45-degree angle until it is completely removed from
the socket guides. (See
Figure 53
Immediately place the SODIMM in an antistatic bag to protect it from ESD damage.
Step 7

Installing a SODIMM

To install a SODIMM module, follow these steps:
Attach an ESD-preventive wrist or ankle strap and follow its instructions for use.
Step 1
Place the line card on an antistatic mat so that the faceplate is nearest to you.
Step 2
Cisco XR 12000 Series Router Ethernet Line Card Installation
74
Moving the Plastic Latch Away from the SODIMM
Figure 53b.)
Removing a 144-pin SODIMM Module
a
b
45 º
OL-7861-01