Hohem iSteady X2 User Manual page 4

iSteady X2 Remote control
To pair the remote with the gimbal press the function button on the gimbal 7
times. The Bluetooth light will flash yellow and green and enter the pairing mode.
The pairing can be completed in 30 seconds after the gimbal enters the
pairing mode. If the remote is not paired within 30 seconds, the pairing will be
canceled. Click the function button to cancel the pairing. Double click the function
button to clear the paired remote control and cancel the pairing.
1. Power button
2. Shutter button
3. Function button
Single press the shutter button to take a photo or to start/end the video.
Double press it to switch between the photo and video modes. Triple press to switch
the front and rear cameras (only available in the app).
Single press the function button to switch between the landscape and portrait
modes. Double press to recenter the gimbal and triple press for inception
(auto-rotation).
Single press the M button for pan and tilt follow; double press for pan follow;
triple press to lock all. Press four times for POV (all follow) and long-press to switch
the zoom in/out mode and gimbal tilt control mode (zoom in/out mode only available
in the app).
4. M button (gimbal working mode)
5. Navigation buttons
6. Indicator light