Appliance Network Configuration - Fidelis Network CommandPost Quick Start Manual

7. Appliance Network Configuration

Start the Appliance Network Configuration
1. Power on the appliance(s).
2. Connect to the component CLI using either of the following:
‒
Via KVM Console, see
‒
Via iLO, see
Option 1: Connect to the Component CLI Using KVM Console
1. Connect a keyboard and monitor to the appliance.
2. Continue with Complete the Appliance Network
Option 2: Connect to the Component CLI Using iLO
iLO supports DHCP by default. If you need a static IP address, before performing this procedure, first
follow Configuring iLO to Use a Static IP
1. Log into the iLO console:
https://<IP address>
where <IP address> is the iLO IP address
2. Specify the credentials:
‒
Username - Administrator
‒
Password - A random eight-character string
‒
DNS name - ILOXXXXXXXXXXXX, where the X characters represent the server serial
number.
The iLO firmware is configured with a default username, password, and DNS name. The default
information is on the serial label pull tab attached to the server that contains the iLO management
processor. Use these values to access iLO remotely from a network client by using a web
browser.
3. In the iLO web interface, navigate to iLO Integrated Remote Console.
4. Select Power & Thermal.
5. Click Reset.
The system shuts down and restarts. For Fidelis Network appliances version 9.4.1 or later, a
screen similar to below is displayed. If you do not see this screen, contact Fidelis Customer
Support.
6. Continue with Complete the
.
Copyright © 2022 Fidelis Cybersecurity
Option 1: Connect to the Component CLI Using KVM Console
Option 2: Connect to the Component CLI Using iLO
Address.
Configuration.
®
, Inc. All rights reserved
Configuration.
6
www.fidelissecurity.com