Fidelis Network CommandPost Quick Start Manual page 9

5. Use the following credentials at the login prompt. You will be required to change the password
immediately.
‒
user: fidelis
‒
default password: fidelispass
6. From the command line, run:
sudo /FSS/bin/setup
You will be prompted for the fidelis password.
7. With Setup, select Network Settings.
8. Configure the network parameters for the system and each active network interface.
‒
Use the Network Configuration table you prepared earlier
‒
When complete, return to the top menu.
9. When complete, select OK to leave Setup.
10. From the command line, reboot the system:
sudo /fss/bin/shutdown.pl --user admin –reboot
8. Fidelis Licensing
The Fidelis CommandPost comes with a 60-day evaluation license. The CommandPost user interface
shows the Host ID for the Fidelis Network hardware, the current license key, and the expiration date.
To access the License page
1. Log into the CommandPost.
2. Access the License page.
For versions 9.4 and later
a. Navigate to: Administration > System > License & System
For versions 9.3.x
a. Navigate to: Administration > System > Components
b. In the row for the CommandPost, click the
c. Click License.
3. If your license key shows <no license> or <invalid>, see
.
Copyright © 2022 Fidelis Cybersecurity
®
, Inc. All rights reserved
(Appendix
icon.
Request a License below.
9
A).
www.fidelissecurity.com