Table of Contents
Advertisement
Trouble
Description
Clock Loss
The time and date were reset to default. To
reprogram:
1. Press the
using the 12-hour clock or the
to display the time using the 24-hour clock.
2. Enter the desired time and then press
3. Enter the date and then press
AC Failure
Power failure detected. The system is running
on the backup battery pack.
Supervision Trouble
Zone(s) and/or wireless output(s) displayed
has/have not sent a check-in signal within the
programmed interval (see page 24).
Console Tamper
The Magellan console was tampered with.
Zone Tamper
Zone(s) and/or wireless output(s) displayed
was/were tampered with.
Fail to Communicate
The Magellan console has failed to contact the
with Central*
monitoring station.
Fail to Communicate
The Magellan console has failed to contact
with Voice Reporting*
telephone number programmed for Voice
reporting.
Fail to Communicate
The Magellan console has failed to contact
to Pager*
telephone number programmed for Pager
reporting.
Fail to Communicate
The Magellan console is unable to
with PC*
communicate with the WinLoad software.
Fail to Communicate
The Magellan console has failed to contact
with Voice Utility*
telephone number programmed for Voice
Utility reporting.
* When a communication failure trouble is acknowledged by
OK
pressing [
], you will be given the option to call your service
provider. See Service Telephone Number on page 30.
Paradox Magellan Systems
HRS
[12
]
key to display the time
HRS
[24
]
OK
[
OK
[
]
.
key
]
.
37
Advertisement
Table of Contents
