Honeywell Dolphin 99EXL0 I Series User Manual page 38

Front Speaker
The front speaker is the receiver for handset voice calls. See
Dolphin Models
General Notification LED
The light emitting diode (LED) located above the top right corner of the LCD display flashes
and illuminates during resets, scanning/imaging, and taking a picture. This LED can be
programmed by various software applications.
Charge Indicator LED
The light emitting diode (LED) located above the top left corner of the LCD display illuminates
when the Power Tools BattMon application is enabled and the device is on AC charge. For
more information, consult the Dolphin Power Tools User's Guide for Windows Embedded
Handheld 6.5.
Microphone
The integrated microphone that provides audio input for handset and speakerphone voice
calls. See
Navigation Keys
The centrally located navigation keys enable you to move and position the cursor through
software programs. The up and down arrows are programmed to perform specific functions
when pressed in combination with the Blue and Red modifier keys. For more details, see
the Navigation Keys
Power Key
The power key
Mode or wakes the terminal from Suspend Mode. See
Recessed Keyboard
There are three keyboard options: a 34-key alpha/numeric keyboard, a 43-key alpha/numeric
keyboard or a 55-key full alpha/numeric keyboard. For a complete overview of each keyboard,
see Using the Keyboards
Red Modifier Key
See Using the Modifier Keys
SCAN Key
The SCAN key is centrally located for easy access with the right or left hand. When pressed,
the SCAN key activates the scanner/imager. The SCAN key also functions as a system wake-
up control for the terminal.
Touch Panel Display
The color 3.7 inch liquid crystal display (LCD) touch panel is covered with an industrial,
protective lens for greater durability. The video graphic array (VGA) display resolution is
480 X 640.
The color LCD (16 bit RGB) uses thin film transistor (TFT) technology. The touch panel
backlight illuminates when the screen is touched, but not when the Backlight key is pressed.
For more information, see
3 - 6
on page 9-5.
Voice Communication
on page 6-3.
located at the lower left corner of the keypad puts the terminal in Suspend
on page
on page 6-3.
Backlight
on page 9-5.
6-1.
on page 7-9.
GSM/HSPA+ Global Radio
Suspend Mode on page 2-13.
Using