Honeywell Dolphin 99EXL0 I Series User Manual page 139

Auxiliary Battery Well
See Auxiliary Battery Well
Power/Dock LED
Indicates if power is supplied to the HomeBase and if a terminal is docked properly in the base.
This color
Red
Green
AUX Battery LED
Indicates status of the battery charging in the auxiliary battery well; see
12-4.
This color
Orange
Green
Red, Flashing The internal temperature of the auxiliary battery is too hot or there is a battery error.
For information about charging a battery in the auxiliary battery well, see page 12-6.
COMM LED
This is the communication LED. It indicates the status of data transfer between the Dolphin
terminal and the host device. The color of this LED differs if the base is using the serial or USB
port connection.
If using the serial port
This color
Red
Green
Orange
If using the USB port
This color
Green
on page 12-4.
means...
The HomeBase has power but no terminal is docked.
The HomeBase has power and the terminal is properly seated in the base.
means...
The auxiliary battery is charging.
The auxiliary battery has completed charging and is ready for use.
Charge the auxiliary battery in a cooler environment or replace the battery with a
new Honeywell battery.
means...
Serial data is being sent from the host device to the base.
Serial data is being sent from the base to the host device.
Serial data is being sent in both directions at the same time.
means...
A USB Connection is established with the host workstation.
Back Panel on page
12 - 3