Table of Contents
Advertisement
Installation
Prepare for Installation
This illustration shows the size of enclosure required for the appliance and the dimensions of the
appliance. Dimensions are shown in inch measurement and metric centimeter measurement. For
best cooking results your oven must be level. This can be checked at the final installation stage with a
carpenters level across the top of the appliance front. If levelling is required, shim the oven between
the bottom of the cabinet opening and the oven bottom. Please note that the power supply box must
be mounted in the cupboard below, modifications to the cupboard may be required.
CAUTION- Children climbing on oven to reach items could be seriously injured therefore,
do not store items of interest to children in cabinet above the oven.
Please note: The wall oven face will meet your cabinet facing resulting in some heat transfer to
the cabinet facing. If your cabinets have a plastic coating or veneer check with the manufacturer
to ensure it was applied with a (300
adhesive are not heat resistant, it is possible that the coating will deform or become detached,
particularly along the edges that meet the wall oven.
You must have a qualified electrician
connect the new oven to ensure that all
electrical codes and rules are observed.
°
F) heat resistant adhesive. If the plastic coating and the
1 ½"
3.81 CM
4
Hide quick links:
Advertisement
Table of Contents
