Table of Contents
Advertisement
Items
Adjustment
(G)
BBIC Clock
*
Adjustment
(H)
Hookswitch
*
Check with
DC
Characteristics
(I)*
DTMF
Generator
Confirmation
Point
1. Execute the command "Conttx".
TP49
2. Input command "rdeeprom 02 86 01", then you can confirm the current value.
3. Adjust the frequency of TP49 executing the command "setfreq xx (where xx is the
value)" so that the reading of the frequency counter is 10.368000MHz ± 10Hz.
1. Connect CN1 (Telephone Socket) to Tel-simulator which is connected with 600
-
2. Set line voltage to 48V at on-hook condition and line current to 40mA at off-hook
condition of nomal telephone.
3. Execute the command "sethooksw 01".
4. Confirm that the line current is 40mA ± 5mA.
5. Execute the command "sethooksw 00".
6. Confirm that the line current is 0mA + 0.2mA.
1. Connect CN1 (Telephone Socket) to DTMF tester.
-
2. Execute the command "sethooksw 01" and "dtmf_Hi".
3. Confirm that the high frequency (1477.06Hz) group is -6.5dBm ~ -9.5dBm.
4. Execute the command "dtmf_lo".
5. Confirm that the low frequency (852.05Hz) group is -9.0dBm ~ -12.0dBm.
6. Execute the command "dialtone 0".
Procedure
58
Check
Replace
IC2,
C63,
.
CN1,
Q4,
Q5,
IC2,
R49,
R43,
R46,
C40,
C109,
R42,
Advertisement
Table of Contents
