Declarations Of Conformity; Conformité Européenne (Ce) Marking Directive; European Union Statements - Cisco SOHO Series Regulatory Compliance And Safety Information Manual

Declarations of Conformity

Declarations of Conformity
The Declaration of Conformity statements for this product can be found at the following URL:
http://www.ciscofax.com
If you still have questions regarding the compliance of these products or you cannot find the information
Note
you are looking for, please send an e-mail request to complianceinfo@cisco.com.
Conformité Européenne (CE) Marking Directive
This product bears the CE mark in conformance with Annex VII of Directive 1999/5/CE.
The following CE mark and class-2 identifier is affixed to the equipment and packaging:

European Union Statements

The following statements apply to Cisco 801 routers and Cisco 803 routers used in the
European Union (EU).
•
•
Network Termination Point Statement
This product does not contain a "Network Termination Point" (NTP) as defined by ETSI 300 386-2. This
product is classified by the manufacturer as "Terminal Equipment." If you have any additional questions,
please contact your local network operator.
ISDN S/T Ports Statement
These ports have not been classified as "directly connected ports" to outside cables as defined by
CISPR 24, 1997 by the manufacturer. If you have any additional questions, please contact your local
network operator.
Regulatory Compliance and Safety Information for Cisco 800 Series and SOHO Series Routers
16
Network Termination Point Statement
ISDN S/T Ports Statement
OL-10260-02