Radio - Cisco SOHO Series Regulatory Compliance And Safety Information Manual

Radio

Radio
This section describes radio compliance conditions for the Cisco 800 series routers and Cisco SOHO
routers. It contains the following:
•
•
•
•
•
•
•
Agency Approval and Standards
The agency approvals and standards for 2.4 GHz radio are as follows:
•
•
•
•
•
•
•
•
•
•
•
•
The Part 15 radio device operates on a non-interference basis with other devices operating at this
Caution
frequency when using the integrated antennas. Any changes or modification to the product not expressly
approved by Cisco could void the user's authority to operate this device.
Note This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to
certain frequencies and/or may require a license for operation. For more details, contact Cisco Corporate
Compliance.
Regulatory Compliance and Safety Information for Cisco 800 Series and SOHO Series Routers
10
Agency Approval and Standards
Power Level Settings
Canadian Compliance Statement
Statement 287—Declaration of Conformity to R&TTE Directive 1999/5/EC for the European
Community, Switzerland, Norway, Iceland and Liechtenstein
RF Exposure
Guidelines for Operating Cisco Wireless Access Points in Japan
Administrative Rules for Cisco Wireless Devices in Taiwan
CFR47 part 15.247
RSS-210 Rev 5
ETSI EN 300.328.1
ETSI EN301.489.1& .17
RFS-29
Japan Std 33a and Std 66
EN 300.328-1
EN 300.328-2
EN 301.489-1
EN 301.489-17
EN 60950-1
EN 50835
OL-10260-02