Cisco SOHO Series Regulatory Compliance And Safety Information Manual page 9

Cisco systems routers instruction manual
Hide thumbs Also See for SOHO Series:
Table of Contents

Advertisement

Normally, this equipment will be used in conjunction with FCC approved equipment that limits the
Encoded Analog Content that provides the required Billing Protection.
The facility interface and service order codes for the Cisco 800 series and the SOHO series routers are
shown in
Table 2
Port Type
ISDN BRI S/T
ISDN BRI U
DSU 56K
ADSL
SHDSL
FXO
FXO
DID
Analog Modem
Cisco 800 series and SOHO series routers bearing labeling identification number US:5B1MFNA0013 or
US:5B1DLO1B0144, and Cisco 860 and 880 router models bearing labeling identification number
US:5B1ISO1B0247 comply with the following requirement:
FCC Rules and Regulations 47 CFR Part 68
TIA/EIA/IS-968, Technical Criteria for Terminal Equipment to Prevent Harm to the Telephone
Network, July 2001, as adopted by the Administrative Council on Terminal Attachments (ACTA).
Cisco 801, 802, 803, 804, 805, 806, 811, 813, 815, 826, 827, 828, 831, 836, 837, 851, 856, 857, 858,
871, 877, and 878 routers, and Cisco SOHO 76, 77, 78, 91, 96, and 97 routers bearing labeling
identification number US:5BMFMAM0013 or US:5B1DLO1B0144, and IAD881F, IAD881B,
C881SRST, , 888, 888G, IAD888F, IAD888B, C888SRST, routers bearing labeling identification
number US:5B1IS01B0247 comply with the following requirement:
FCC Rules and Regulations 47 CFR Part 68
TIA/EIA/IS-968, Technical Criteria for Terminal Equipment to Prevent Harm to the Telephone
Network, 2002, Addendum 3 2005, as adopted by the Administrative Council on Terminal
Attachments (ACTA).
Cisco's Supplier Declarations of Conformity are available online at:
http://wwwin-tools.cisco.com/cse/prdapp/jsp/ExternalSearch.jsp?selNavObjId=search|extSearch
OL-10260-02
Table
2.
Cisco 800 Series and Cisco SOHO Series Routers Facility Interface and
Service Order Codes
Facility Interface
Code
02IS5
02IS5
04DU5-56
Metallic
Metallic
02LS2
02GS2
02RV2.T
02LS2
Regulatory Compliance and Safety Information for Cisco 800 Series and SOHO Series Routers
Service Order
Code
Jack Type
6.0N
RJ-49C
6.0N
RJ-49C
6.0N
RJ-48S
RJ-11C
RJ-14C
None
RJ-11C
None
RJ-21X
AS.2
RJ-11C
None
RJ-11C
Telecommunications
9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SOHO Series and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

800 series

Table of Contents

Save PDF