Table of Contents
Advertisement
TECHNICAL DATA
The unit is designed for indoor or sheltered use. The installation conditions must prevent ingress of atmospheric precipitations and direct
solar radiation at the ambient temperatures from -31 °F up to +122 °F.
Outdoor unsheltered mounting is allowed provided an extra cover and weather hoods are installed on the air ducts (not included
in the delivery set). The frost protection for the water drainage and connected pipelines must be provided during sub-zero ambient
temperatures (if the unit is equipped with air cooler). The heat medium temperature in the water heat exchangers (if available) must be
sufficient to prevent its freezing.
Hazardous parts access and water ingress protection rating:
•
IP54 for the unit motors
•
IP40 for the assembled unit connected to the air ducts without extra cover or weather hoods
•
IP44 for the assembled unit with connected air ducts, extra cover and weather hoods (specially ordered accessories)
IP00 for the unit not connected to the air ducts
The unit design is constantly being improved, thus some models may be slightly different from those described in this manual.
AV02 CFV 1500
AV02 CFV 2500
AV03 CFV 3500
AV07 CFV 5000
AV07 CFV 6000
The full technical data list is stated in the supplied technical data sheet.
www.vents-us.com
UNIT OVERALL DIMENSIONS
B
Model
A
A1
71.7
61.0
81.5
70.9
81.5
70.9
B1
B
B1
76.8
29.5
86.6
35.0
91.7
54.7
7
Advertisement
Table of Contents
