Vents-us PS Series Quick Start Manual

WALL VENT
PS SERIES
INSTALLATION
TOOLS REQUIRED
Drill
1 DRILL A CORE HOLE IN THE WALL
Screwdriver
Ø D
Ø D
Screws 4 pc for 3/16"
Pencil openings
2 INSERT THE TELESCOPIC AIR DUCT
Indoor
The air duct end must protrude from outside for the distance A
that enables installation of the outer ventilation hood or grille.
For details, please refer to the installation instruction for the
ventilation hood or the grille.
Install the air duct with the minimum slope 3° downwards
outside.
Fill the gaps between the air duct and the wall with mounting
foam.
Dowel 4 pc for 1/4"
Outdoor
min 3°
A