TECHNICAL DATA MODEL NO: A61018 POWER ADAPTOR INPUT: 100-240V ~50/60HZ 0.15A MAX OUTPUT: DC 5V BATTERIES: DC 6V 4 X C BATTERIES (NOT INCLUDED) SPEAKER POWER: 1.5W RMS DECLARATION OF CONFORMITY We declare that this product conforms to the following product legislation in accordance...
Page 3
IMPORTANT INFORMATION - RETAIN FOR FUTURE USE SAFETY INFORMATION Important safety instructions – read carefully before use. It is important that this instruction manual should be retained with the radio for future reference. These warnings have been provided in the interest of safety.
Page 4
IMPORTANT INFORMATION - RETAIN FOR FUTURE USE • The use of accessory • If the appliance is not going to attachments is not be used for a period of time please ensure that it is fully recommended by the appliance manufacturer disconnected, from the mains apart from those supplied power.
Page 5
DISPOSAL INSTRUCTIONS FOR AKAI ITEMS IN ACCORDANCE WITH THE WEEE DIRECTIVE. APPLIANCES BEARING THE SYMBOL SHOWN ABOVE MAY NOT BE DISPOSED OF IN DOMESTIC RUBBISH. YOU ARE REQUIRED TO DISPOSE OF THE OLD ELECTRICAL AND ELECTRONIC APPLIANCES LIKE THIS SEPARATELY, PLEASE VISIT : WWW.RECYCLE-MORE.CO.UK OR WWW.RECYCLENOW.CO.UK...
PACKAGE CONTENTS INSTRUCTION MANUAL DAB RADIO POWER ADAPTOR FEATURES AND CONTROLS REAR PANEL ANTENNA HEADPHONE SOCKET BATTERY COMPARTMENT ADAPTOR INPUT (5V)
CONTROL PANEL POWER SPEAKER VOLUME CONTROL MODE LCD DISPLAY MENU/INFO SCAN 10. PRESET PREV 11. ENTER/SNOOZE NEXT BEFORE FIRST USE Remove the product from the box. Remove any packaging from the product. Please retain all packaging until you have checked and counted all the parts and the contents against the parts list.
USING YOUR APPLIANCE POWER ADAPTOR: RADIO: Insert one end of the power adaptor into Press the POWER button to turn the the DC jack on the back of the radio. radio on. Plug the other end of the adaptor in at The radio will enter DAB mode.
Page 9
STORING STATIONS: FM STATION INFORMATION: Press the INFO button repeatedly to scroll You can store up to 10 DAB and 10 FM through the station information. radio stations. • Signal Strength: Displays a signal bar To store a station, you must be with the current station strength.
Page 10
USING YOUR APPLIANCE ALARM: SETTING THE SLEEP TIMER: Setting the alarm: Press and hold the Menu button to go to Menu setting then press NEXT Press and hold Menu button to go button to choose sleep set. Press to menu setting, press NEXT to go ENTER to confirm.
TROUBLESHOOTING Problem Solution No sound Increase the volume. If listening with headphones, make sure they are properly connected. Buttons are not Turn off the radio and turn back on after a few seconds. working FM radio: Static Signal reception is low, adjust the antenna or move the radio to a DAB: Intermittent stronger signal location.
Page 12
Call:+44 (0)333 220 6042 8.30am to 6.00pm Monday-Friday Visit: www.akaionline.co Distributed throughout the UK by RK Wholesale LTD *REGISTER YOUR PRODUCT ONLINE AT WWW.AKAIONLINE.CO AND ENJOY 3 YEARS PEACE OF MIND AKAI CUSTOMER SUPPORT TEAM +44 (0) 333 220 6042 0818.V3...
Need help?
Do you have a question about the A61018 and is the answer not in the manual?
Questions and answers
Where is the release key