Cisco uBR10-SRP-OC12SML Instructions Manual page 19

Cisco uBR10-SRP-OC12SML DPT WAN Line Card for the Cisco uBR10012 Router
Replacing the Cisco uBR10-SRP-OC12SML DPT WAN Line Card
Pick up the replacement Cisco uBR10-SRP- OC12SML DPT WAN line card and position it in front of
Step 1
the card cage slot.
Carefully align the upper and lower edges of the card with the upper and lower guides in the chassis.
Step 2
Figure 10
Slide the line card into the card slot in the chassis so that it firmly seats in the backplane connectors.
Step 3
To secure the line card in the chassis, simultaneously close the ejector levers.
Step 4
78-13602-01
About Removing and Replacing a Cisco uBR10-SRP-OC12SML DPT WAN Line Card
Inserting the Cisco uBR10-SRP- OC12SML DPT WAN Line Card
Cisco uBR10-SRP-OC12SML DPT WAN Line Card
19