Advertisement
5. Hold [b] Adapting Unit and push its dent at bottom
until it stops.
6. Keep holding [b] Adapting Unit and tighten the
Bolt with [d] Wrench securely.
[d]
Bolt
7. Set [h] / [ i ] / [k] Spacer, [g] Base Flange or Original Flange,
and Blade into the Spindle then tighten the Lock Nut by Wrench.
Lock Nut
Blade
[g] or
Original Flange
[h] / [ i ] / [k]
Spindle
9. Rotate [a] Main Unit toward
[b] Adapting Unit
with Shaft as axis.
For some grinders, match the shape of
grinder's gearcase with the center hole of [b]
Adapting Unit then hold it from the top.
[b]
Wrench
Refer to the
Installation Guide
[b]
For some grinders, tighten 3
screws originally used for fixing
the Guard.
(OLD type)
L3410FR, L3410VR type
HD28AG-125, AGV17-125 series,
AG16-125 series, AG8-125, AG9-125 type
8. Hang the Shaft of [a] Main Unit into the Hook of
[b] Adapting Unit.
10. Tighten [c] Bolt with [d] Wrench.
Make sure that the rear end of
[b] Adapting Unit is securely hooked.
GA5021 / GA5030 / GA5040 /
GA5041 / DGA511 / DGA515 /
DGA504 / DGA513 / DGA517 type
WPB18LTXBL125 /
WB18LTXBL125 / WP18LTX125 /
W18LTX125 / WEV1500-125 /
WE1500-125 / WEV850-125 /
WP850-125 / W850-125 / W750-125
type
M18FHSAG125, AGV13-
125XSPDEB, M18FSAGV125,
AGV15-125, AGV13-125, AG13-
125XSPD, AGV12-125 type
L3410FR, L3410VR type
HD28AG-125, AGV17-125, AG16-
125, AG8-125, AG9-125 type
Hook
[b]
(OLD type)
[a]
Shaft
[d]
[c]
-3-
Advertisement
