Advertisement
Quick Links
Dust Extractor for 100-125mm Diamond Grinding Cup Wheel
NKC-125MA
INSTRUCTION MANUAL
WARNING
・DO NOT use the NKC-125MA with the angle grinder which can NOT be fitted correctly instructed by this manual.
・NKC-125MA is only for grinding concrete and block. DO NOT use for grinding steel or other materials.
・NKC-125MA must be used with the Vacuum suitable for the concrete dust.
・NKC-125MA is only for 100-125mm Diamond Grinding Cup Wheels. DO NOT use with abrasive wheels.
・Always check the NKC-125MA for damage, cracks, or deformation before use.
・DO NOT use the NKC-125MA if it is cracked, damaged or bent as this could lead to injury.
・Be sure to wear the protective goggles, dust mask, protective foot wear, earplugs and other protective equipment when working.
・Keep NKC-125MA away from gasoline, solvents, and paraffin.
・Ensure the work piece is securely clamped before working.
Explanation
of the pictograms.
SPECIFICATIONS
Model Code
NKC-125MA
Ø100～125mm (h21mm) Diamond Grinding Cup Wheel
Suitable Blade
Weight
470g (Main Unit with adaptor system)
Cut material
Concrete, Block.
Suitable
Makita / BOSCH / Dewalt / Milwaukee / Metabo / HiKOKI / FLEX 115-125mm angle grinder.
※Makita / BOSCH : X-LOCK model can't be fitted.
Angle Grinders
※Dewalt : D28137, DCG405FN can't be fitted.
※Based on the web
※Milwaukee : AG10 / AGV10 series can't be fitted.
as of 2021 Sep.
[a] Main Unit / [b] Lock Nut / [c] Flange / [d] Spacer T12 x id16 &14.3 / [e] Spacer T10 x id14.3
OVER VIEW
[ f ] Spacer T7 x id14.3 / [g] Joint / [h] Wrench (L) / [ i ] Wrench (S) / [k] Sub Plate / [m] Offset Plate
[a]
Fig.1
INSTALLATION
Check the instruction video
at this QR code.
1. Detach the Guard from Angle Grinder. (Fig.2)
2. Some models need its Lever detached. (Fig.3)
Refer to the attached sheet for details.
General
Read the operating
Warning.
instructions before use.
Angle
Grinder
Wear
Wear
eye protection.
breathing protection.
[b]
[g]
[c]
[d]
[h]
[e]
[ i ]
[ f ]
Guard
[Makita]
[Dewalt]
[Metabo]
Fig.2
Wear
ear protection.
protective gloves.
[ k ]
Some models ONLY.
Lever
40Vmax series, GA5050R.
DWE4057,
DCG405P2 / 406N / 409NT / 416N
WPB18LTXBL125 / WB18LTXBL125
WP18LTX125 / W18LTX125
WEV1500-125 / WE1500-125 series
N300290
Wear
[ m ]
Fig.3
-1-
Advertisement
Related Manuals for NAKAYA NKC-125MA
Summary of Contents for NAKAYA NKC-125MA
- Page 1 N300290 WARNING ・DO NOT use the NKC-125MA with the angle grinder which can NOT be fitted correctly instructed by this manual. ・NKC-125MA is only for grinding concrete and block. DO NOT use for grinding steel or other materials. ・NKC-125MA must be used with the Vacuum suitable for the concrete dust.
- Page 2 3. Attach [a] Main Unit to Angle Grinder. (Some models need [m] Offset Plate between [a] and Angle Grinder) 4. Set [ d / e / f ] Spacer, [c] Flange, and Grinding Cup into Spindle. 5. Tighten the [b]Lock Nut with Wrench. (Fig.4) Wrench Refer to the attached sheet for details.
- Page 3 6. Attach the Handle to the Grinder and Vacuum Hose connect the Vacuum Hose into the Duct with Handle [ g ] Joint. (Fig.7) 7. If the Handle comes in contact, detach the Side Cover from [a] Main Unit. (fig.8) Side Cover Duct Fig.7...
- Page 4 2. Set the Replacement Brush NKC-BR (optional parts) with each Hooks securely hold the Brush. (Fig.15) Brush Hook Fig.14 Replacement Brush NKC-BR (Optional Parts) Fig.15 09th-Dec. 2021 Head Office in Japan NAKAYA CO.,LTD. 1313-92 Yanagisawa, Sanjo, Niigata, Japan Eto Naoya Managing Director...