NAKAYA NK-125MA Instruction Manual

Dust Extractor for 105-125mm Diamond Blade
NK-125MA
INSTRUCTION MANUAL
WARNING
・DO NOT use NK-125MA with the angle grinder which can NOT be fitted correctly as instructed in this manual.
・NK-125MA is only for cutting concrete, block, and tile. DO NOT use for cutting steel or other materials.
・NK-125MA must be used with the Vacuum suitable for the concrete dust.
・NK-125MA is only for 115-125mm Diamond cutting blades. DO NOT use with abrasive wheels or tipped saw blades.
・Always check NK-125MA for damage, cracks, or deformation before use.
・DO NOT use NK-125MA if it is cracked, damaged or bent as this could lead to injury.
・Be sure to wear the protective goggles, dust mask, protective foot wear, earplugs and other protective equipment when working.
・Keep NK-125MA away from gasoline, solvents, and paraffin.
・Ensure the cutting material securely clamped before cutting.
Explanation
of the pictograms.
SPECIFICATIONS
Model Code NK-125MA
Suitable Blade 105-125mm T1.5-2.2mm Diamond Blades.
Cut Depth 5-25mm (125mm Blade) 5-15mm (105mm Blade)
Weight 690g (Main Unit with adaptor system)
Work material Concrete, Block, and Tile.
Suitable
Makita / BOSCH / Dewalt / Milwaukee / Metabo / HiKOKI 100-125mm class small angle grinder.
Angle Grinders
※Based on the web
as of 2022 Sep.
OVER VIEW
[a]
Separate [a] and [b].
INSTALLATION
1. Detach the Guard from the grinder.
Guard
Grinder
General Read the operating
Warning. instructions before use.
[a] Main Unit / [b] Adapting Unit / [c] Bolt / [d] Wrench / [e] Offset Plate / [ f ] Flange
[g] Milwaukee Plate / [h] Joint / [n] Washer
[e]
[ f ]
[c]
[b]
, GA5050R type
Wear Wear
eye protection. breathing protection.
Some special angle grinders (ex. X-LOCK type)
may not be installed. Please scan the QR code
on the left to check compatibility.
[n]
[ g ]
[ h ]
[d]
Check the
Installation Guide.
GWS18V-7 type
Above grinder needs its lever and related components detached.
Wear
ear protection. protective gloves.
Sold Separately
Flange Set NKFS-125MA
is required separately for M14 Spindle Grinders
of BOSCH, Dewalt, and Milwaukee.
M14
(GWS12-125 type)
DCG405P2/406N/
409NT/416N
type only.
WPB18LTXBL125 / WB18LTXBL125
/ WP18LTX125 / W18LTX125 /
DWE4056 / 4057, DCG405P2 /
WEV1500-125 / WE1500-125 type
406N / 409NT / 416N type
N300303
Wear
-1-