NAKAYA NK-125MA Instruction Manual

Dust Extractor for 115-125mm Diamond Blade
NK-125MA
INSTRUCTION MANUAL
WARNING
・DO NOT use NK-125MA with the angle grinder which can NOT be fitted correctly as instructed in this manual.
・NK-125MA is only for cutting concrete, block, and tile. DO NOT use for cutting steel or other materials.
・NK-125MA must be used with the Vacuum suitable for the concrete dust.
・NK-125MA is only for 115-125mm Diamond cutting blades. DO NOT use with abrasive wheels or tipped saw blades.
・Always check NK-125MA for damage, cracks, or deformation before use.
・DO NOT use NK-125MA if it is cracked, damaged or bent as this could lead to injury.
・Be sure to wear the protective goggles, dust mask, protective foot wear, earplugs and other protective equipment when working.
・Keep NK-125MA away from gasoline, solvents, and paraffin.
・Ensure the cutting material securely clamped before cutting.
Explanation
of the pictograms.
SPECIFICATIONS
Model Code NK-125MA
Suitable Blade 115-125mm T1.5-2.2mm Diamond Blades.
Cut Depth 5-25mm (125mm Blade) 5-20mm (115mm Blade)
Weight 690g (Main Unit with adaptor system)
Work material Concrete, Block, and Tile.
Suitable Makita / BOSCH / Dewalt / Milwaukee / Metabo / HiKOKI / FLEX 115-125mm class small angle grinder.
Angle Grinders
Makita / BOSCH : X-LOCK type
※Based on the web
Dewalt : D28137/ DCG405FN type
as of 2022 Jan.
Milwaukee : AGV10-125EK,
OVER VIEW
Separate [a] and [b].
INSTALLATION
1. Detach the Guard from the grinder.
Guard
Grinder
General Read the operating
Warning. instructions before use.
AG10-125EK,
AG800-125EK type
[a] Main Unit / [b] Adapting Unit / [c] Bolt / [d] Wrench / [e] Offset Plate / [ f ] Milwaukee Plate
[g] Base Flange / [h] Spacer T9.5 / [ i ] Spacer T7 / [k] Spacer T6 / [m] Joint / [n] Washer / [p] Hook
[e]
[a]
[g]
[c]
[b]
Check the
Installation Guide.
, GA5050R type
Wear
eye protection. breathing protection.
Metabo
WEPBA17-125 / WEBA17-125 / WEA17-125 /
can NOT
WEVA15-125 / WA13-125 / WEA11-125 type
WPB13-125 / WB18LTBL11-125 / WVB18LTBL11-
be fitted.
125 / WPB18LTBL11-125 type
HiKOKI
G13SB4, G13SE3, G13BAWQZ, G13BY, G13YG type
[ f ]
[h] [ i ] [k]
[d]
is required separately for
the "Large Flange" models
on the right.
DWE4056 / 4057, DCG405P2 / 406N /
409NT / 416N type
Above grinder needs its lever and related components detached.
Wear Wear
ear protection.
[m]
WEPBA17-125 / WEBA17-125 / WEA17-125 /
WEVA15-125 / WA13-125 / WEA11-125 type
WPB13-125 / WB18LTBL11-125 / WVB18LTBL11-
125 / WPB18LTBL11-125 type
G13SB4, G13SE3, G13BAWQZ, G13BY, G13YG type
Sold Separately
Sub Plate
Check the instruction
video at this QR code.
DCG405P2 /
406N / 409NT /
416N series
type only.
WPB18LTXBL125 / WB18LTXBL125 /
WP18LTX125 / W18LTX125 / WEV1500-
125 / WE1500-125 type
N300289_Rev1
Wear
protective gloves.
Sub Plate
is required
separately.
[n] [p]
Large Flange
-1-