NAKAYA NKC-125MA Instruction Manual

NKC-125MA
WARNING
・DO NOT use NKC-125MA with the angle grinder which can NOT be fitted correctly as instructed in the manual.
・NKC-125MA is only for grinding concrete and block. DO NOT use for grinding steel or other materials.
・NKC-125MA must be used with the Vacuum suitable for the concrete dust.
・NKC-125MA is only for 100-125mm Diamond Grinding Cup Wheels. DO NOT use with abrasive wheels.
・Always check NKC-125MA for damage, cracks, or deformation before use.
・DO NOT use NKC-125MA if it is cracked, damaged or bent as this could lead to injury.
・Be sure to wear the protective goggles, dust mask, protective foot wear, earplugs and other protective equipment when working.
・Keep NKC-125MA away from gasoline, solvents, and paraffin.
・Ensure the work piece is securely clamped before working.
Explanation
of the pictograms.
SPECIFICATIONS
Model Code NKC-125MA
Ø100～125mm (h21mm) Diamond Grinding Cup Wheel
Suitable Tool
Weight 470g (Main Unit with adaptor system)
Work material Concrete, Block.
Suitable Makita / BOSCH / Dewalt / Milwaukee / Metabo / HiKOKI 100-125mm class small angle grinder.
Angle Grinders
※Based on the web
as of 2022 Sep.
[a] Main Unit / [b] Offset Plate / [c] Milwaukee Plate / [d] Wrench / [e] Lock Nut / [ f ] iD20 Ring / [ g ] Base Flange
OVER VIEW
[ h ] Adjustment Washer (4pcs.) / [ k ] Joint / [ m ] Washer
[a]
[ c ]
[b]
INSTALLATION
1. Detach the Guard from the grinder.
Guard
Grinder
Dust Extractor for 100-125mm Diamond Grinding Cup Wheel
INSTRUCTION MANUAL
General Read the operating
Warning. instructions before use.
[ d ]
, GA5050R type
Wear Wear
eye protection. breathing protection.
Some special angle grinders (ex. X-LOCK type)
may not be installed. Please scan the QR code
on the left to check compatibility.
[ e ]
[ f ] Sold Separately
[ g ]
[ h ]
Check the
Installation Guide.
DWE4056 / 4057, DCG405P2 /
GWS18V-7 type
406N / 409NT / 416N type
Above grinder needs its lever and related components detached.
Wear Wear
ear protection. protective gloves.
[m]
[k]
Flange Set NKCFS-125MA
is required separately for M14 Spindle Grinders.
M14
DCG405P2/406N/
409NT/416N
type only.
WPB18LTXBL125 / WB18LTXBL125
/ WP18LTX125 / W18LTX125 /
WEV1500-125 / WE1500-125 type
N300302
-1-