Ingersoll-Rand Schlage Camelot FE365-CAM-GEO Programming Manual

23780034
Codes
Programming Code (Six Numbers)
• Used to program the lock.
• DOES NOT unlock the lock.
• If you forget the Programming
Code, you can reset your lock
back to factory settings. See the
Keypad Locks User Guide for more
information.
• Lock comes preset with a default
Programming Code.

Functions

See reverse for function descriptions. Beeps sound only when beeper is enabled.
Enter
Programming Code
Add
(six numbers)
User Code
Wait for
3 Lights + 3 Beeps
Enter
Programming Code
Delete
(six numbers)
User Code
Wait for
3 Lights + 3 Beeps
Enter Current
Programming Code
Change
(six numbers)
Programming
Wait for
Code
3 Lights + 3 Beeps
Enter
Programming Code
Enable
(six numbers)
Vacation Mode
Wait for
3 Lights + 3 Beeps
Enter
Programming Code
Enable/Disable (six numbers)
Beeper Wait for
3 Lights + 3 Beeps
Enter
Programming Code
Delete ALL
(six numbers)
User Codes
Wait for
3 Lights + 3 Beeps
Enter
Programming Code
Enable/Disable
(six numbers)
Turn Lock
Wait for
Feature
3 Lights + 3 Beeps
Keypad Locks
Programming Guide
User Codes (Four Numbers)
• Used to unlock the lock.
• Up to 19 possible User Codes
can be stored in the lock at a
time.
• Lock comes preset with two
default User Codes.
Press Press
Wait for
Keypad
turns blue
3 Lights + 3 Beeps
Press Press
Wait for
Keypad
turns blue
3 Lights + 3 Beeps
Press Press
Wait for
Keypad
turns blue
3 Lights + 3 Beeps
Press Press
Success!
Keypad
turns blue
1 Light + 1 Long Beep
Press Press
Success!
Keypad
turns blue
1 Light + 1 Long Beep
Press Press
Wait for
Keypad
turns blue
3 Lights + 3 Beeps
Press Press
Success!
Keypad
turns blue
1 Light + 1 Long Beep
Default Programming Code
Código de programación
predeterminado
Code du défaut programmation
Place Label Here
Poner la etiqueta aquí
Placer l'autocollant ici
Default User Codes
Códigos de usuario predeterminado
Codes du défaut utilisateur
Enter New Enter Same New
User Code User Code
(four numbers) (four numbers)
Wait for Success!
3 Lights + 3 Beeps 1 Light + 1 Long Beep
Enter Unwanted Enter Same Unwanted
User Code User Code
(four numbers) (four numbers)
Wait for Success!
3 Lights + 3 Beeps 1 Light + 1 Long Beep
Enter New Enter Same New
Programming Code Programming Code
(six numbers) (six numbers)
Wait for Success!
3 Lights + 3 Beeps 1 Light + 1 Long Beep
Enter
Programming Code
Disable
(six numbers)
Vacation Mode
Success!
1 Light + 1 Long Beep
Enter
Programming Code
(six numbers)
Success!
1 Light + 1 Long Beep