Advertisement
How to Install Multiple QC-S300F/QC-S30F Collators
5.
Plug the power cord into the QC-S30F.
6.
Plug the power cord into an outlet.
Important
• Plug the power cord into a properly-grounded outlet.
• If you must use an ungrounded outlet, be sure to
ground the machine separately. A poor ground can
cause problems for the machine due to by static
electricity, lightning strikes, or current leakage.
WARNING
• Do not attach the ground to a gas pipe.
* When connecting three collators, repeat
these steps to connect the two QC-S300F/
QC-S30F's.
* After the installation is complete, set the AC
power supply frequency for each unit. See
the "QC-S300F/QC-S30F Frequency Set-
ting" instructions which are shipped with
each machine.
Power Cord
21101
20102K1
11
Advertisement
