Broan EIT1366SS Instructions Manual page 6

INSTALL THE HOOD
(Non-Ducted Installation Only)
NON-DUCT KIT MODEL ANKIBF4 CONTENTS
T
F R O N
NON-DUCT
PLENUM
NON-DUCT PLENUM
COLLAR
NOTE: Non-ducted installations require Non-Duct Kit,
Model ANKIBF4 (purchase separately).
CAUTION: Use only flexible duct provided.
2. Attach non-duct
collar to non-
duct plenum
using (4) M4 x 8
mm sheet metal
screws.
(4) M4 x 8 mm
SHEET METAL
NON-DUCTED
RECIRCULATION
FILTER
8 MOUNTING
SCREWS
(M4 x 8
Pan Head
Sheet Metal)
2 TIE
WRAPS
FLEXIBLE DUCT
F R O N
T
SCREWS
INSTALL THE HOOD
(Non-Ducted Installation Only) (cont'd)
3. Assemble (4)
angle brackets
to the lower
hood mounting
locations using
(8) M4 x 10mm
pan head
machine screws
(2 for each angle
bracket).
(16) M4 x 10 mm
PAN HEAD
MACHINE
SCREWS &
4. D e t e r m i n e
(16) M4
SERRATED
dimension "H"
FLANGE NUTS
based upon
ceiling height
and height of
hood installation
above cooktop:
7-FT. 8-IN. CEILING
Hood 26" above cooktop H = 30"
8-FT. CEILING
Hood 26" above cooktop H = 34"
Hood 30" above cooktop H = 30"
9-FT. CEILING
Hood 26" above cooktop H = 46"
Hood 30" above cooktop H = 42"
Hood 36" above cooktop H = 36"
10-FT. CEILING (with Flue extension FXNEIT1SS)
Hood 26" above cooktop H = 58"
Hood 30" above cooktop H = 54"
Hood 36" above cooktop H = 48"
5. Attach the upper set of (4) angle brackets to the outside of
the lower angle brackets according to dimension "H". Use
(16) M4 x 10 mm pan head machine screws and (16) M4
serrated flange nuts (4 at each angle bracket connection).
6. Attach the angle bracket assemblies to the upper hood
mounting locations using (8) M4 x 10 mm pan head
machine screws (2 for each angle bracket).
MODEL EIT1366SS
Page 6
(8) M4 x 10 mm
PAN HEAD
MACHINE
SCREWS
1
7
/
"
1 6
(8) M4 x 10 mm
PAN HEAD
MACHINE
SCREWS
H