Table of Contents
Advertisement
Medema A/S
User guide 2433-2018-B
Calf pads - angle
You set how tight the calf
pad should be to tilt, by
loosening or tightening
this pin screw.
Calf pads up/down.
Loosen the screw indicated
in the adjacent image.
Adjust and tighten again.
210 mm from top position to
lowest position.
Calf pads in/out.
Loosen the screw indicat-
ed in the adjacent image.
Adjust and tighten again.
40 mm from inner position
to outer position.
63 of 96
Lowest
Highest
Version 2.0.1/2022
Advertisement
Table of Contents
