medemagroup MC 1124 Child User Manual page 42

Medema A/S
User guide 2433-2018-B
If the described manual release procedures fails, an emergen-
cy release tool made from red plastic comes with each docking
station.
1. Move wheelchair forward to remove the pressure on the lock pin
2. Place the emergency release tool in the gap between the locking plate and
the docking station.
3. Push the release tool and wheelchair forward until the locking pin has been
forced down - after which the wheelchair can reverse out of the docking
station.
Dahl Engineering offers two docking systems, the Mk ll, and
a new power height adjustable called Dahl VarioDock. Please
also refer to Dahl Engineering instructions for installation, use
and maintenance for the system used.
Installation of the Dahl Docking systems in the vehicle
Only professional companies in the business of converting or
building wheelchair accessible vehicles can order the docking
system from Dahl Engineering.
A qualified and experienced technician must carry out the in-
stallation. Dahl Engineering can provide vehicle specific instal-
lation instructions for a large range of vehicles, which must be
respected by the fitter.
Please contact Dahl Engineering for further information about
approved vehicles and fitting positions.
Dahl Engineering contact details are available at:
gineering.dk
42 of 96
www.dahlen-
Version 2.0.1/2022