medemagroup MC 1124 Child User Manual page 47

Medema A/S
User guide 2433-2018-B
Positioning the occupant restraint when using it with the
Dahl Docking systems only
Danger!
• When using wheelchair with Dahl Docking systems, the floor an-
chorage points for the occupant restraint system should be locat-
ed 10-60 mm outside wheels, on each side. The pelvic belt must
be worn low across the front of the pelvis so that the angle of the
pelvic belt is within the optional or preferred zone of 30° to 75° as
shown. A steeper (greater) angle within the preferred zone, 45° to
75° is desirable i.e. closer to, but never exceeding 75° degrees
10-60 mm.
10-60 mm
Preferred and optional angles for the pelvis belt when using Dahl Docking Systems.
10-60 mm.
10-60 mm
47 of 96 Version 2.0.1/2022