Check The Power Source - IBM eServer pSeries 630-6C4 Quick Setup Instructions Manual

2
2
Read safety notices
2
3

Check the power source

This system can be equipped with the following power supplies:
115/230 Volts ac Auto Detect
-48 Volts dc
2
4
Check the rack stabilizer bar
Read and understand the Rack Safety Instructions
4.1
found in your system rack installation guide.
4.2 Ensure that a hazardous condition is not created
due to uneven mechanical loading when installing
your system into the rack. Your rack must have
either the stabilizer bar securely
mounted or must be bolted to
a concrete floor.
The exclamation mark surrounded by a yellow triangle
denotes caution. A CAUTION notice indicates the presence
of a hazard that has the potential of causing moderate or
minor personal injury. Before doing a step that contains a
caution icon, read and understand the caution statement that
accompanies it.
Power Distribution Bus