Check Your Inventory - IBM eServer pSeries 630-6C4 Quick Setup Instructions Manual

1

Check your inventory

Note: Review your inventory
closely. If any of the components
shown on this page are missing , or
you encounter any difficulties while setting
up your system, contact your service
representative for assistance.
Cable-Management Arm Kit contains:
1- Cable-Management Arm
1- Rack to Cable Management Arm Bracket
1- Cable-Carrier Support Bracket
2 - 7 mm Rack Retaining Screws
2 - 5 mm Bracket to System Retaining Screws
2 - Slide Rail Assemblies
Rack-Mount Template
Front
3
2
Alignment-Pin Bracket Kit contains:
8 - Assorted Alignment Pins
2 - 7 mm Thumbscrews
4 - Pin Brackets
The alignment-pin bracket kit
might be needed when installing
your system in a non- IBM style
rack. If you are installing your
system in an IBM rack, you will
not use this portion of the
alignment-pin bracket kit.
Rack-Mounting Kit contains:
8 - 5 mm System to Rail Screws
8 - 7 mm Rail to Rack Screws
Rack-Mounting Kit also contains:
2 - Nut clips (Used for racks containing
round EIA location holes)
2 - Nut clips (Used for racks containing
square EIA location holes)
2 - Latch-Mounting Brackets
F R F R
O N O N
T T
R IG R IG
H T H T
S ID S ID
E E
F R
O N
T