Table of Contents
Advertisement
OPERATING INSTRUCTIONS
1 . Turn the unit on or off by pressing the Power
button on the control panel (C) or by pressing
the Power button on the remote control (B) .
Once the power is off, in heating mode, the
heating elements will stop working first . The
fan will continue working for up to 90 seconds
to dispense residual heat inside the heater .
This is a normal function .
2 . Select a heat setting by pressing the heat mode
button on either the control panel (C) or the re-
mote control (B) .
Power for High is 1,500 W .
Note: Set temp must be higher than room temp .
3 . Set the temperature by pressing the arrows on
the control panel (C) or the remote control (B) .
You can set the temperature on the heater
anywhere between 50°F and 90°F or between
10°C and 32°C . Once you have chosen the
desired temperature, the heater will remain
on until the room temperature increases to the
temperature on the digital display . The heater
will cycle on and off to maintain the desired
room temperature .
4 . To activate the Fan function press the Fan
mode button on the control panel (C) or the
Fan mode button on the remote control (B)
to toggle between the three fan settings high,
medium and low .
1
C
2
C
3
C
4
C
HIGH
12
B
B
B
OR
B
MED
LOW
Advertisement
Table of Contents
