Page 1
OIL FILLED RADIATOR Safety & Operating Instructions WARNING! Model # YAA02E-5 TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY, READ YAA02E-7 ALL THE INSTRUCTIONS BEFORE USING THIS YAA02E -9 HEATER, AND FOLLOW THESE INSTRUCTIONS! YAA02E -11 BE SURE TO SAVE THIS MANUAL FOR FUTURE...
1. Important Instructions ......Parts Identification ........Mode and Technical data………………… Safety Control……………………………. CONTENTS 3. Assemble ..........4. Operate............Set temperature ………………………………… Set timer(auto- off)………………………… Set timer(auto- on)………………………… Timer function examples………………….. Fahrenheit/Celsius function………………… Care and Cleaning ........Conformity with Directives Environmental Protection --SAVE THESE INSTRUCTIONS--...
1. IMPORTANT INSTRUCTIONS Basic safety precautions should always be followed when using electrical products, especially when children are present. WARNING: TO AVOID THE RISK OF ELECTRICAL SHOCK, FIRE OR INJURY TO PERSON, ALWAYS MAKE SURE THE PRODUCT IS UNPLUGGED FROM THE ELECTRICAL OUTLET BEFORE RELOCATING, SERVICING, OR CLEANING IT.
Page 4
20. Do not use this product to dry or heat clothing, shoes, pipes, or any other item. 21. Do not place or expose this product to water or other liquids. 22. Do not move the product when it is heated. Allow the product to thoroughly cool before handling it.
3. Assemble 1. Unpack the Castor Wheels and Arc-shaped Brackets from the product packaging. 2. Turn the radiator upside-down on a scratch-free and stable surface to prevent damage to the paint finish or your floor surfacing. 3. Fit the two (2) Castor Wheels onto the radiator by placing the Arc-shaped Brackets between the outermost fins on each side of the radiator.
Note: if operated at the Low setting, the heater will not provide as much heat output as in the High setting , however , the Low setting will not require a much electrical current to operate .To avoid overloading a circuit , do not plug the heater into a circuit that already has other appliances working.
2. Use the + and - buttons to set the heater start time between 1 and 10 hours. This function will activate once the timer icon stops blinking. 3. The heater will automatically turn on when time expires. NOTE: If the desired temperature was set prior to setting the timer function, the heater will cycle on and off as per the selected desired temperature setting once the heater begins to operate.
Conformity with Directives This product is CE marked to denote conformity with Directives 73/23/EEC(Low Voltage) and 89/336/EEC (Electromagnetic Compatibility), as amended. Environmental Protection Disposal This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.