Operating Instructions - Life Smart R-LS-W6-WIQH-M Manual

OPERATING INSTRUCTIONS

4 . To set the timer power off, start the unit and
press the Timer button on the control panel (C)
or remote control (B) .
Note: The timer-power-off function can only be
set when the heater is in power-on mode .
The digital display on the control panel (C)
changes from the set temperature readout
to a time value for the timer . Press the Timer
button repeatedly to change the number val-
ue between a range of 0 to 12 hours (in 1-hour
intervals) .
The Timer light turns on when the timer is set .
5 . To set the timer power on, while powering off
the unit press the Timer button on the control
panel (C) .
Note:
The timer-power-on function can only be
set when the heater is in power-off mode .
The digital display on the control panel (C) will
indicate time value for the timer . Press the
Timer button repeatedly to change the num-
ber value between a range of 0 to 12 hours (in
1-hour intervals) .
The Timer light turns on when the timer is set .
6 . To replace the batteries, remove the battery
cover (1) from the remote (B) by applying
pressure to the battery cover (1) and sliding
it away from the remote (B) . Insert two AAA
batteries (not included) (2) and close the
remote by placing the battery cover (1) back on
the remote (B) .
Note: Do not mix old and new batteries . Do not
mix alkaline, standard (carbon-zinc), or
rechargeable (nicad, ni-mh, etc) batter-
ies .
4
C
TIMER
5
C
TIMER
6
1
B
14
TIMER
TIMER
2
B
B