Cisco Router 831 Hardware Installation Manual page 47

Chapter 2 Installation
4.
Click the Router Setup link in the Cisco Router Web Setup home page, and
Step 4
follow the instructions that appear in the page that is displayed.
When you complete setup using CRWS, connect to another website, using the
Step 5
connected PC. If you successfully connect to the website, then setup is complete,
and you can continue using the router.
78-14784-02
If the PC is configured to automatically receive an IP address, but the web
page still does not appear, select Start/Run, type winipcfg in the Run
window, and examine the address in the IP address field. The address should
be in the format 10.10.10.X, in which X is a number that is 2 or greater; for
example, 10.10.10.2 or 10.10.10.3. If the IP address is not in this format,
verify that an Ethernet adapter name is visible in the Adapter field. If it is not,
return to Step 3 in the "Checking the PC Configuration" section on page 2-16
and add TCP to the list of protocols. Then return to the beginning of the
"Starting the CRWS Software" section on page
procedure.
Cisco 831 Router and SOHO 91 Router Hardware Installation Guide
What to Do If You Cannot Connect to a Website
2-22, and complete the
2-23