Cleaning The Filters - Mr. Coffee One-Touch CoffeeHouse BVMC-EM7000DS Instruction Manual

1. Remove the milk reservoir from the unit by lifting up the milk reservoir release button and
simultaneously sliding the milk reservoir out.
2. Remove the lid of the reservoir.
3. Dispose of any milk left, then rinse and wash the milk reservoir and its lid thoroughly with
warm soapy water. Make sure to rinse and dry them well. Do not use abrasive cleaners
and scouring pads, as they will scratch the finish.
NOTE: The milk reservoir is also dishwasher safe (top rack). Do not place the lid of the
milk reservoir in the dishwasher.
4. Fill milk reservoir with water, not above the MAX fill line. Place milk reservoir back onto
unit, lifting up on reservoir release button and simultaneously sliding milk reservoir in,
holding reservoir by the lid.
5. Place a large empty cup under the froth dispensing tube.
6. Turn the Froth Control Knob counter clockwise to the clean position "
the Clean "
through the froth dispensing tube. Let the cleaning cycle run until you no longer see any
milk coming out of the tube, or let the cycle run until it stops automatically.
7. Dispose of any water left in the milk reservoir and place it back in the unit. You should feel
the milk reservoir lock in place.
DEEP CLEANING THE FILTERS
Make sure to deep clean your filter every 90 days for optimal brewing performance. Follow
these disassembly instructions and rinse the pieces in a large bowl of warm water. Once
rinsed thoroughly, wipe dry and reassemble.
Step1
Unlock
Lift

CLEANING THE FILTERS

1. To remove the detachable bottom covers from under the filters, rotate them
counterclockwise towards the unlock icon "
2. Wash the detachable bottom covers and filters with warm soapy water. Make sure to
rinse and dry them well.
3. Place the detachable bottom covers back onto the filters by inserting them in their place
and then rotating them clockwise (away from the unlock icon "
FROTH MILK DISPENSING TUBE CLEANING - WITHOUT AFFECTING MILK IN RESERVOIR
1. Ensure the milk reservoir and lid are properly inserted in the unit.
2. Place a large empty mug under the froth dispensing tube.
3. Turn the Froth Control Knob counter clockwise to the clean position "
" " button to activate the clean function. The unit will start releasing steam through the
froth dispensing tube. Let the cleaning cycle run until you no longer see any milk coming
out of the tube, or let the cycle run until it stops automatically.
BVMC-EM7000DS_22ESM1.indd 13 BVMC-EM7000DS_22ESM1.indd 13
" button to activate the clean function. The unit will start releasing steam
Step2
Push
Remove
Eng lish- 13
" then press
Step3
Remove
Seal
Remove
Filter
".
") until you hear it click.
" then press the
2022/2/18 下午5:36 2022/2/18 下午5:36