Cleaning & Maintenance; Troubleshooting - iGenix IG5200 User Manual

CLEANING & MAINTENANCE
Always unplug teh heater from the wall and allow it to be cool. Clean the outside by wiping with a damp
cloth (not wet). Do not use detergents or abrasive materials. Do not allow for any water to enter the
heater. You can use a vacuum cleaner to remove dust from the inlet and outlet grille.
Storing the Heater
When the heater is not used for long periods of time, it should be protected from dust and stored in a
clean dry place. The original packaging box can be saved and used to store the heater away.
TROUBLESHOOTING GUIDE
Please refer to the trouble shooting guide when experiencing an issue with your heater. If you still cannot
determine the fault then please call our Customer Services number 01473 271272
Problem
The heater
does not work.
The heater is
getting too hot
8
Possible Cause
1. Not properly plugged into the
mains wall socket.
2. Not switched on
3. No electricity in the mains wall socket.
1. Inadequate air flow
2. Heat setting too high
3. Vents are blocked
Solution
1. Plug in firmly.
2. Make sure appliance is switched on.
3. Check fuse or breaker.
1. Make sure there is circulating air in
the room
2. Adjust heat settings accordingly
3. Make sure all vents are clear and free
from obstruction.