Titan TTI885IPD Instructions Manual page 28

Care and maintenance
EN EN
The golden rules for care
WARNING! Always switch the product off, remove the battery pack and
let the product cool down before performing inspection, maintenance
and cleaning work!
1. Keep the product clean. Remove debris from it after each use and before
storage.
2. Regular and proper cleaning will help ensure safe use and prolong the life of
the product.
3. Inspect the product before each use for worn and damaged parts. Do not
WARNING! Only perform repairs and maintenance work according to
specialist!
General Cleaning
1. Clean the product with a dry cloth. Use a brush for areas that are hard to
reach.
2. In particular clean the air vents (3) after every use with a cloth and brush.
3. Remove stubborn dust with high pressure air (max. 3 bar).
General Cleaning
NOTE: Do not use chemical, alkaline, abrasive or other aggressive
detergents or disinfectants to clean this product as they might be
harmful to its surfaces.
4. Check for worn or damaged parts. Replace worn parts as necessary or
contact an authorised service centre for repair before using the product again.
Maintenance
Your tool requires no additional lubrication or maintenance. There are no user
serviceable parts in your tool.
28
MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 28
TTI885IPD
2021/12/23 10:31 PM