Titan TTI885IPD Instructions Manual page 26

Product functions
EN EN
Switching on/off
Ensure the forward / reverse rotation
control (4) is not on centre lock position.
1. Switch the product on by pressing
the on/off switch (5) (Fig. 9).
2. Switch the product off by releasing
the on/off switch (5) (Fig. 9).
WARNING! Never attempt to lock the on/off switch (5) in its ON position!
Speed control
Adjust the speed directly when operating with the built-in speed control. The on/
off switch (5) of this product is combined with a speed control. The speed is
controlled by how far the on/off switch is depressed.
Belt Clip
WARNING! When the tool is attached to the belt, position yourself to
avoid entanglement with surrounding objects.
The belt clip (9) can be assembled on the either side of the combi drill.
1. Set the forward / reverse rotation control (4) in the middle positon (lock) (Fig.
10).
2.
3. The belt clip (9) can be hooked on your belt or pocket, etc (Fig. 11).
26
MNL_18V IMPACT DRIVER_MID18-LI_IMGB_V1_211224.indd 26
TTI885IPD
4
5
Fig. 9
. (Fig. 10).
2021/12/23 10:31 PM