Flymo EasiCut 420 Original Instructions Manual
Flymo EasiCut 420 Original Instructions Manual

Flymo EasiCut 420 Original Instructions Manual

Flymo easicut 420; easicut 450; easicut 500; easicut 510; easicut 600xt hedge trimmer
Hide thumbs Also See for EasiCut 420:

Advertisement

EasiCut 420/EasiCut 450/
®
EasiCut 500/EasiCut 510
EasiCut 600XT
Original Instructions
EasiCut 420/450/500/510
EasiCut 600XT

Advertisement

Table of Contents
loading

Summary of Contents for Flymo EasiCut 420

  • Page 1 EasiCut 420/EasiCut 450/ ® EasiCut 500/EasiCut 510 EasiCut 600XT Original Instructions EasiCut 420/450/500/510 EasiCut 600XT...
  • Page 2: Carton Contents

    Carton Contents EasiCut 420/450/500/510 Handguard blade cover instruction manual belt clip EasiCut 600XT Handguard blade cover instruction manual belt clip IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new product. IF ANY PARTS ARE MISSING CONTACT:- Husqvarna UK Ltd.
  • Page 3 Safety If not used properly this product can be dangerous! This product can cause serious injury to the operator and others, the warnings and safety instructions must be followed to ensure reasonable safety and efficiency in using this product. The operator is responsible for following the warning and safety instructions in this manual and on the product.
  • Page 4 Safety cont’ Keep cutting tools sharp and clean. Properly cable, replace it with a new one. If replacement of the maintained cutting tools with sharp cutting edges cable is necessary, this must only be done by an Ap- are less likely to bind and are easier to control. proved Service Centre in order to avoid a safety haz- g) Use the power tool, accessories and tool bits ard.
  • Page 5 Cables CABLES MAINS PLUG REPLACEMENT - IMPORTANT IMPORTANT • If the plug supplied is cut off it should be destroyed. If you want to use an extension cable when operating your There is an electric shock hazard if a cut off plug is in- serted into a 13 amp socket.
  • Page 6: Before Use

    2. To start, push forward the lock-off button (G1), squeeze the main switch lever (G2), release lock-off button. EasiCut 420/450/510 3. Main switch lever (G2) and one other need to be held 1. There are three switch levers fitted to your Hedgetrimmer.
  • Page 7: How To Use

    How to Use How to Use your hedge trimmer 1. Inspect area to be cut before each use - remove ob- jects which can be thrown or become entangled in the cutting blades. 2. Always keep the hedge trimmer in front of your body. Hold handle firmly with both hands and stand in a se- cure and stable position.
  • Page 8: Environmental Information

    5. If you have a problem with your machine contact your All of the centres listed stock genuine Flymo Spare Parts. local Approved Service Centre ensuring you have full NOTE: Our Service Repairers act on their own behalf and are details of your product as described on the product rat- not empowered to commit or legally bind Husqvarna UK Ltd.
  • Page 9: Ec Declaration Of Conformity

    Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice. Copyright © 2011 Flymo S.A. All rights reserved. Flymo® and other product and feature names are registered or unregistered trademarks of Flymo S.A.

This manual is also suitable for:

Easicut 450Easicut 500Easicut 510Easicut 600xt

Table of Contents