Traffic Redirecting Configuration; Traffic Redirecting Overview; Configuring Traffic Redirecting - H3C S5120-SI Configuration Manual

Traffic redirecting configuration

This chapter includes these sections:

Traffic redirecting overview

•

Configuring traffic redirecting

•
Traffic redirecting overview
Traffic redirecting redirects the packets matching the specific match criteria to a certain location for
processing.
The following redirecting actions are supported:
Redirecting traffic to an interface: redirects packets that require processing by an interface to the
•
interface. This action applies to only Layer 2 packets, and the target interface must be a Layer 2
interface.
Configuring traffic redirecting
Follow these steps to configure traffic redirecting:
To do...
Enter system view
Create a class and enter class
view
Configure match criteria
Return to system view
Create a behavior and enter
behavior view
Configure a traffic redirecting
action
Return to system view
Create a policy and enter policy
view
Associate the class with the
traffic behavior in the QoS
policy
Return to system view
Apply the
QoS policy
Use the command...
system-view
traffic classifier tcl-name [ operator { and
| or } ]
if-match match-criteria
quit
traffic behavior behavior-name
redirect interface interface-type
interface-number
quit
qos policy policy-name
classifier tcl-name behavior
behavior-name
quit
To an interface Applying the QoS policy to an interface
To a VLAN Applying the QoS policy to a VLAN
Globally Applying the QoS policy globally
49
Remarks
—
—
—
—
Required
Required
—
—
—
—
—
—
—