Load Default Settings - Acer TravelMate 730 Service Manual

Hide thumbs Also See for TravelMate 730:
Table of Contents

Advertisement

If you fail to enter the password correctly after three tries, the following message or symbol appears.
Removing a Password
Should you decide to remove a password, do the following:
6
Use the cursor up/down
Disk).
6
Use the cursor left/right (
NOTE: When you want to remove the Hard Disk password, you are prompted for the Hard Disk password
before it is removed.
IMPORTANT:The jumper setting Switch 4 of SW4 on the system main board, the default setting is "OFF:
Enable Password Check", this means that the system will always check the password when users set
in. However, if users miss their own password, the servicers can switch the jumper to "ON: Disable
Password Check" and then the Setup passsword and Power-on password will be unlocked.
Therefore, users can reset their new password. (Refer to Chapter 5 Jumper and Connector for more
information on setting the switches).
IMPORTANT:If Setup password is forgot by users, service technicians may need to update computers' BIOS
or set up jumper SW4 Switch 4 on mainboard to bypass.
IMPORTANT:If Power-on password is forgot by users, service technicians may set the jumper SW4 to bypass
password check, then remove the password.
IMPORTANT:If Hard Disk Password is missing, service technician can solve the lock of hard disk by using
master HDD password utility. For the HDD password utility, service technician can contact with local
service management level.
Changing a Password
To change a password, follow these steps:
6
Remove the current password. See "Removing a Password" on page 30.
6
Set a new password. See "Setting a Password" on page 29.

Load Default Settings

If you want to restore all parameter settings to their default values, select this menu item and press Enter. The
following dialog box displays.
If you would like to load default settings for all parameters, use the cursor left/right (
then press Enter. Choose No if otherwise.
30
keys to highlight a Password parameter (Setup, Power-on or Hard
key to remove the password.
keys to select Yes;
Chapter 2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents