Page 1
Default Codes RR1H is already set by default to LG, Vizio and Philips TVs (Codes 0002 + 0807). If the TV is not an LG, Vizio or Philips, then you will need to program this remote using the instructions provided below.
Page 2
Device code setting 1) Turn on the TV device you want to control, and find the corresponding brand code from attached code list. 2) Hold down “Setup” and “Enter” keys for about 3 seconds until LED lights and remains on, release all keys. 3)...
Page 3
Auto search 1) Turn on the TV device you want to control. 2) Hold down “Setup” and “Enter” keys for about 3 seconds until LED lights and remains on, release all keys. 3) Press and release “POWER,” LED will blink one time & keep lighting on, every 2 seconds it will send the codes of POWER (or MUTE if no POWER code) one by one.
Need help?
Do you have a question about the RR1H and is the answer not in the manual?
Questions and answers