Do you have a question about the RR1001S and is the answer not in the manual?
Questions and answers
Anup Pandit
April 18, 2025
I have aiwa tv but I can't control the remote
1 comments:
Mr. Anderson
May 9, 2025
To control an Aiwa TV with the Anderic RR1001S remote, use one of the following TV codes: 1019 or 1024. Follow the remote's programming instructions to enter the code.
Page 1
We recommend downloading it to your mobile device or bookmarking our URL so you have easy access to the manual when ever you need help with your RR1001S remote. You can go to URL below or scan the QR code below to go there directly.
Page 2
seconds, the remote shall quit the setup mode. Program – Shortcut Key Method 1. Turn on TV manually. 2. Press and hold [SET] and the respective TV brand key from chart below. (0-9, +100, MUTE) simultaneously and continue to hold keys until TV is powered off;...
5 seconds; the indicator light will light and remain on. Release the two keys. Remote is now in learning mode. 2. Point the original remote toward the RR1001S. The distance should be within 1-3 cm and eyes of remotes must directly align.
reset to factory settings. NOTE: If remote is reset to factory settings, the factory code can control 95% of most popular TVs. Setting the Sleep Timer NOTE: The SLEEP button operates the Sleep function of your TV providing it supports the Sleep function. Alternatively, you can enable the remote to turn off your TV after a period of 1 to 99 minutes with the instructions provided in this section.
Need help?
Do you have a question about the RR1001S and is the answer not in the manual?
Questions and answers
I have aiwa tv but I can't control the remote
To control an Aiwa TV with the Anderic RR1001S remote, use one of the following TV codes: 1019 or 1024. Follow the remote's programming instructions to enter the code.
This answer is automatically generated