Page 1
Anderic RRUR01 For help or to download a PDF manual: go to website below either by going to the URL or by scanning the QR code on your mobile device. We recommend bookmarking below URL on mobile device so you can easily retrieve manual...
Page 2
Anderic.com/rrur01 Programming – Code Input Method Allows for programming using codes from attached code list. 1. Turn on the device you want to control. 2. Find the corresponding brand code from attached code list, and write down. 3. Press and hold the mode key (e.g. TV) you wish to program for about 3 seconds until the mode light remains on, release the mode key.
Page 3
4. Check other keys to see if most can work correctly. If not, repeat steps 1-4. DIGIT DVD/VCR AUDIO CABLE/STB Insignia/Dynex Insignia/Dynex Bose RCA/GE/Proscan LG/Zenith LG/ Sylvania Denon Motorola Panasonic/ Mitsubishi Panasonic DirecTV Dish Network Philips/Magnavox Philips/Magnavox Onkyo System/Echostar Samsung Pioneer Panasonic General Instruments...
Page 4
Device mode lock When enabled, this feature allows for locking a device mode so that it cannot be re-programmed. This can be used as a safety feature for accidental programming. If enabled, device lock must be disabled first before mode can be programmed again. 1.
Page 5
code of mode assigned, no matter what mode the remote currently resides. 1. Press and hold the mode key (e.g. STB) you wish to enable/disable Roku punch-through for, for about 3 seconds until the mode key lights and remains on, release the mode key. 2.
on, release the key. 2. Input code “9 0 0”, 3. Press the key you want to disable the punch-through for; mode light blinks 2 times to confirm. Learning function Learning allows for programming individual keys using your existing remotes codes. 1.
Page 7
2. Input code "9 999"; all mode lights will light and remain lit for about 3 seconds then go out to confirm successful reset. FOR ADDITIONAL HELP AND SUPPORT AS WELL AS A DOWNLOADABLE VERSION OF THIS MANUAL VISIT ANDERIC.COM. ANDERIC® REGISTERED TRADEMARK DAN’S...