Alamo Bush Hog HDC-3 Series Operator's Manual page 71

Mower Model ....Engine Series
Number
HDC2361FS3 ..........Kawasaki FS691
HDC2561KP3 ..........Kohler KT745
Locate your Mower Model Number and then go to the
Engine Manufacturer's website and navigate to the man-
ual needed. Follow links listed below, listing the engine
series when prompted.
KAWASAKI ENGINES:
www.kawasakienginesusa.com
go to Parts and Support tab
go to Manuals in dropdown
go to Series and choose FS Series
choose Manual or FS691
Manual from dropdown.
KOHLER ENGINES
www.kohlerengines.com/manuals
go to Manuals and Maintenance
go to Owners & Service Manuals
enter engine model number under I know my model
number (KT745)
Under Manuals select Owners
Select Language (English)
Checking Engine Oil Level
NOTE: Check oil level when engine is cold.
Engine oil should be checked before each use or daily.
Follow the procedures for checking oil as instructed by
the engine manufacturers manual which applies to your
Zero Turn Mower.
HDC-3 ZT 05/19
© 2019 Alamo Group Inc.
MAINTENANCE
Changing the Engine Oil and Oil Filter
NOTE: It is recommended after the first 8 hours of
usage the oil and filter be changed.
Follow the procedures for changing oil and oil filter as
instructed by the engine manufacturers manual which ap-
plies to your Zero Turn Mower.
The engine manufacturers manual will provide the rec-
ommended service intervals, oils, amount required and
filters required when changing oil.
Dispose of the used oil at a recycling center.
Servicing the Air Cleaner
Service Intervals:
Every 250 hours replace the primary Air Filter (more often
in dusty or sandy conditions).
Check the Safety Filter every 250 hours and replace
every 500 hours of usage.
Follow the procedures for changing air filter as instructed
by the engine manufacturers manual which applies to
your engine.
Maintenance Section 6-3