Model Description; All Models - Hatco FLAV-R-SAVOR FSHAC-2 Installation And Operating Manual

IMPORTANT SAFETY INFORMATION
CAUTIONS
Use only non-abrasive cleaners. Abrasive
cleaners could scratch the finish of your unit
marring its appearance and making it
susceptible to soil accumulation.
To assure proper operation and extend the
life of humidified models utilizing the auto-fill
system, the water filter cartridge must be
installed in the water supply line.
Do not use de-ionized water. De-ionized water
will greatly shorten the life of the water
heating elements and plumbing components.

MODEL DESCRIPTION

ALL MODELS

Flav-R-Savor ® Heated Air Curtain Cabinets consist
of an easy to clean stainless steel front panel and
black powdercoat painted body. Features include
easy-to-use digital controls, a lighted On/Off switch,
a metal sheath heating
(1829 mm) power cord with plug.
MODELS FSHAC-2 AND FSHAC-3
The FSHAC non-humidified Heated Air Curtain
Cabinet is available in two-pan or three-pan models,
holding half-sized sheet pans. The FSHAC-2 (two-
pan model) comes equipped with four rubber feet.
The FSHAC-3 (three-pan model) comes equipped
with 4" (102 mm) legs, which require assembly to
the unit before operation. Models may be ordered
with the optional single base mounting kit allowing
for two units to be mounted back-to-back.
Temperature range of this unit is 80°-175°F
(27°-79°C).
MODELS FSHACH-2 AND FSHACH-3
The FSHACH humidified Heated Air Curtain Cabinet
is available in two-pan or three-pan models, holding
half-sized sheet pans. Humidified units are available
in auto-fill or manual fill versions, both having the
capacity to hold 2-1/4 gallons (9 liters). The
FSHACH-2 (two-pan model) comes equipped with
four rubber feet. The FSHACH-3 (three-pan model)
comes equipped with 4" (102 mm) legs which
require assembly to the unit before operation.
Models may be ordered with the optional single
base mounting kit allowing for two units to be
mounted back-to-back. Temperature range of this
unit is 80°-175°F (27°-79°C).
Form No. FSHACM-0106
element and 6'
2
Water Quality Requirements - Incoming water
in excess of 3.0 grains of hardness per gallon
(GPG) (.75 grains of hardness per liter) must
be treated and softened before being used.
Water containing over 3.0 GPG (.75 GPL) will
decrease the efficiency and reduce the
operating life of the unit.
Do not over tighten plumbing connections.
Over tightening may cause leaks.
Figure 1. Model FSHAC-2
Figure 2. Model FSHACH-3