Declaration Of Conformity - JB-Lighting P9 Beamspot Operating Instructions Manual

P9

11. Declaration of Conformity

(Directive 2014/35/EU of the European Parliament and of the Council of 26/02/2014 to approximate
(Directive 2014/30/EU of the European Parliament and of the Council of 26/02/2014 to approximate the
The manufacturer,
declares that the product:
complies with the essential protection requirements of the directives. The following standards were used for conformity
assessment:
Emissions requirements
per EN 55032:2015
Conducted interference emission
EN 55032:2015
Radiation
EN 55032:2015
Harmonic currents
EN 61000-3-2:2015
Flicker
EN 61000-3-3:2013
Immunity - requirements
per EN 61000-6-2:2005
EN 61000-4-2:2009
EN 61000-4-3:2006 +A1:2008 +A2:2010
EN 61000-4-4:2012
EN 61000-4-5:2006
EN 61000-4-6:2014
EN 61000-4-8:2010
EN 61000-4-11:2004
Blaustein, 01/09/2021
________________________
Jürgen Braungardt
CEO
- 40 -
Declaration of Conformity
in the sense of the Directive: 2014/35/EU Low Voltage Directive,
the laws of the Member States relating to electrical equipment designed
for use within certain voltage limits)
in the sense of the Directive: 2014/30/EU Electromagnetic compatibility
laws of the Member States relating to electromagnetic compatibility)
JB-Lighting Lichtanlagentechnik GmbH
Sallersteigweg 15
89134 Blaustein-Wippingen
P9
Information technology equipment, radio interference characteristics -
Limit values and measuring methods - Limit value class A
requirements for information technology equipment, radio interference
characteristics -
Limit values and measuring methods - Limit value class A
Information technology equipment, radio interference characteristics -
Limit values and measuring methods - Limit value class A
Electromagnetic compatibility
Part 3-2: Limits, testing of harmonic currents
(for devices with an input current < 16A per phase)
Electromagnetic compatibility (EMC)
Part 3-3: Limits, limitation of voltage changes,
Voltage fluctuations and flicker in low-voltage networks
(for devices with an input current < 16A per phase)
Electromagnetic compatibility (EMC) - Part 6-2:
Generic standard - Immunity in industrial areas
Part 4-2: Immunity to static electricity discharge
Part 4-3: Immunity to high-frequency electromagnetic fields
Part 4-4: Immunity against fast transient electrical
disturbances (burst)
Part 4-5: Interference voltages against surge voltages
Part 4-6: Immunity to conducted disturbances,
induced by HF
Part 4-8: Immunity to magnetic fields with power technology
frequencies
Part 4-11: Immunity against voltage dips, short-term
interruptions and voltage fluctuations