Gobo Size; Software Update; Testing Of Electrical Equipment - JB-Lighting P9 Beamspot Operating Instructions Manual

8.3 Gobo size

If you want to have your own gobos produced, please note the following dimensions:
Usable diameter, rotating gobowheel 1: 16.00 mm
Usable diameter, rotating gobowheel 2: 16.00mm
Outer diameter: 19.90 mm (+0/-0.1 mm)
Maximum thickness: 1.1 mm

8.4 Software update

The P9 Beamspot can be updated via a USB stick with micro-USB connection. To do this, copy
the file directly into the root directory of the USB stick. Then press and hold the right key below
the display, switch on the power of the P9 Beamspot as soon as the message "Insert USB stick"
appears on the display release the key. Now plug in the USB stick on the back of the device
below the signal connections and follow the instructions on the display. The P9 Beamspot com-
pletes the software update with a reset. You will find the latest software on our homepage.

8.5 Testing of electrical equipment

According to the German Social Accident Insurance (DGUV) Regulation 3 / Regulation 4, electrical
systems and equipment must be subjected to regular inspections. The fixing screw of the DMX
5-pin socket can be used as measuring point for insulation and residual current measurement.
The screw is connected to all sheet metal parts via a contact washer.
PE measuring point
P9
- 35 -