Table of Contents
Advertisement
5.6 Mounting the devices
ATTENTION: Allow a fixture distance of at least 0.5 metres from easily flammable
!
material and the distance between the light emission and the surface to be illuminat-
ed must be at least 2.0 meters.
The P9 Beamspot can be placed on the floor or hang
on a trussing system. Also a mounting horizontally to
a truss system like in the picture is only allowed if the
omega brackets are attached to the outer camlocks.
(distance 223.65mm)
When placing the unit on the floor make sure that it
stands on rigid ground, because the air inlets in the
base must not be covered with anything!
To mount the unit on a trussing system use two of the original JB-Lighting omega brackets with
original Camloc-connectors. You have following four possibilities to mount the omega brackets.
1
140
223,65
The Camlocs must snap in to be locked properly. Ensure that the structure (truss) to which you
are attaching the fixture is secure. If you install the fixture to a truss always attach a safety cable,
that can hold at least 10 times the weight of the fixture.
2
!
Omegabracket distance
223,65 mm
3
P9
✔
✔
4
- 13 -
Advertisement
Table of Contents
