Advertisement
For Mounting the Oil Cooler Guard, we
use the Mounting Holes (as identified in
"Red colour" in the two drawings.
Copyright By SRC
Design and Specification are subjected to change
Mounting Instructions
Step 1:
Remove the original Radiator Guard and
the original Screw in motorbike.
Step 2:
Mounting of Oil Cooler Guard Front
Side (1) Orient the Mounting Holes of
Oil Cooler Guard FS (Front Side) (1),
in-line with the Mounting holes in
the Motorbike, and slide in the
Washer M6 (4) - 2 off and Screw M6
x 25 (6) – 2 off and secure the
threads, but do not tighten it fully.
Page 2
Advertisement
