SPECIFICATIONS
DIMENSIONS - FDW MODELS
Width
Model
(A)
FDW-1
18"
(46 cm)
FDW-2
18"
(46 cm)
FDW-1X
18"
(46 cm)
FDW-2X
18"
(46 cm)
INSTALLATION
GENERAL
The Flav-R-Fresh Holding and Display Cabinets
are shipped with most components installed and ready
for operation. The following installation instructions
must be performed before plugging in and operating
the cabinet.
FLOOR SHEET
The stainless steel floor in all Flav-R-Fresh units
is protected during shipping with a sheet of corrugated
cardboard. This protection must be removed prior
to cabinet operation.
DISPLAY RACKS
The chrome-plated display racks have packing
material and cardboard attached for protection during
shipping. This protection must be removed prior
to cabinet operation.
LEGS
The Flav-R-Fresh cabinets are shipped with four 1"
(2.5 cm) metal screw-type feet attached to the bottom
of the unit. If you ordered the cabinet with the optional
4" (10 cm) Adjustable Legs, see ACCESSORIES for
installation instructions.
Form No. FDWM-0602
Depth
Height
(B)
(C)
19-1/2"
27-1/2"
(50 cm)
(70 cm)
20-7/8"
27-1/2"
(53 cm)
(70 cm)
19-1/2"
27-1/2"
(50 cm)
(70 cm)
20-7/8"
27-1/2"
(53 cm)
(70 cm)
A
CABINET TEMPERATURE
F
POWER
MED
3
4
WATER FILL
2
5
1
6
HUMIDITY
TEMPERATURE
Figure 4. Dimensions
Figure 5 Shipping Tabs for Glass Panels
GLASS PANELS
The Flav-R-Fresh Holding and Display Cabinets have
tempered glass panels that are protected during shipping
by rubber tabs along the glass edges and tape to securely
hold the panels. See Figure 5. These tabs and tape
must be removed prior to cabinet operation.
NOTE: If installing 4" (10 cm) legs, do not remove
glass protection until leg installation is complete.
See ACCESSORIES.
4
B
C
Tab